Love the Brethren

Proverbs 24:17 Rejoice not when thine enemy falleth, and let not thine heart be glad when he stumbleth

I had not planned, when I started this blog, to comment on current events as many bloggers concentrate on. Recently though, I came across something that I feel the need to address. It seems that a prominent creation science evangelist by the name of Dr. Kent Hovind has been sentenced for tax evasion. I don't know many of the details of the case, except that from what I gather he had a long running battle with the IRS over whether or not his "ministry" and himself were required to pay taxes. This apparently was no small misunderstanding , as he has now been sentenced to 10 years.

But the justice, or injustice of that sentence is not what I wish to speak to. Though I have seen Dr. Hovind speak on two separate occasions, and attended one of his debates vs. an evolutionist, he is not someone whose ministry I follow closely. Dr Hovind is someone who I guess would be referred to as a fundamentalist. Doctrinally he would be toward the far end of the spectrum from me in regards to Calvinism. However, he gives every appearance that he loves the Lord, and has served him for many years to best of his ability. While I may disagree with the stand he chose to make in respect to taxes, I cannot help but admire him for dedicating his life to evangelism.

What I find most troubling about this whole story is that I came across it while reading another blog. This blogger, who will remain nameless here, wrote about Dr. Hovind's sentencing with an all too obvious glee! Reading some of the comments and following some of the links revealed this to be a quite common attitude. Now if this had been a "secular blogger" I would not have given it a second thought. Anyone who holds the theory of evolution dear would have cause to count Dr. Hovind as an enemy. But no, this was a blog that in every way presents itself as a Christian blog (which is why I was reading it in the first place). The blog author's major quarrel with Dr. Hovind appear to be that "he is a self-taught amateur" in the field of creation science. Equally as damning in the authors view, seems to be the fact that Dr. Hovind actually defends the King James version of the Bible.

Using that criteria, the author of that particular blog would likely hold me in contempt also. After all, I have no degrees or formal training in theology, and yet I have the impudence to make a feeble attempt at declaring the Gospel. Some readers may have noticed that I too use the KJV exclusively. I have even been guilty of defending the biblical account of creation both among friends and while preaching , without any scientific training beyond high school. Does that make me an enemy to some that claim to be Christians?

The above admonition that we have from the book of Proverbs obviously would not trouble most secular evolutionists. It is however, something that should cause a Christian to take pause. Most of us here in the "west" would acknowledge one such as Saddam Hussein as an "enemy." No one that I know was grieved at his execution. In fact I would say that many that I know were closer to rejoicing than to grief. According to the passage in Proverbs that is something we should guard against, although I do believe that a hearty Amen may be the proper response to the justice of his execution.

But, if you are a Christian, of whatever persuasion, do you count Kent Hovind as an enemy? This is what I find really troubling about the glee with which this Kent Hovind story was reported. 1 John 3:14 says: "We know that we have passed from death unto life, because we love the brethren. He that loveth not his brother abideth in death." So here is the kicker. If love of the brethren is one of the proofs of salvation given in the Bible, then someone needs to be concerned. I would not be so bold or so foolish as to claim that anyone who "piles on" Kent Hovind is not saved. I do not even know them personally. Neither do I know Dr. Hovind well enough to be very sure of his salvation (If misunderstanding of a bible teaching is a proof that one is not saved, then surely none of us will enter heaven; show me a man who thinks he has never been wrong on any doctrine since salvation, and I will show you a man who the Lord will soon humble.)

My question is: if you are celebrating Dr. Hovind's fall, are you bold enough to claim that he is unsaved? If so, I suggest you re-read Proverbs 24:17 above. If not, then I suggest you consider the state of your own soul in the light of 1 John 3:14. Either way, would not the proper response be to pray for Dr. Hovind?

Look Sharp

This post has to do with some of the details that can make or break an engine. Sharp edges. Rarely, if ever, are sharp edges a good thing inside your motor. Of course the time to address this issue is during the engine build. I wouldn't tear down an engine just to look for a "potential" problem like this unless I had a pretty good idea that the problem is likely to be there.

Starting in the middle (more or less) we find the most obvious and in many ways most egregious offenders. That would be the pistons. It is common knowledge that sharp edges in the combustion chamber are a good source of pre-ignition. The piston domes are one of the areas that nearly always needs some attention. Many pistons come out of the box with sharp machined edges, particularly on the edges of the valve reliefs. A few years back one of the aftermarket Harley engine manufacturers even came out with instructions that if the engine was to be used in hot climates that these edges should be rounded to help prevent pinging. All that is really needed is a some medium grit sandpaper to solve this potential problem. I usually use either a de-burring tool (or Buck knife if the de-burring tool is on the other end of the shop) and then finish with sandcloth. So now your beautiful shiny machined pistons domes aren't quite as photogenic, but they are more functionally attractive. Even the generic cast pistons we use in our Knucks, Pans, and Shovels should be inspected. Often they will have a small raised spot at the tip of the dome that has a sharp edge.

But you are not done with the piston yet! Now look at the bottom edge of the skirt. There should be a slight bevel on that lower edge. If there isn't one, imagine that piston on its downstroke with just a little cocking of the piston on the wrist pin. Yeah, I can picture the sharp leading edge of that piston scraping all of the oil right off the cylinder wall! By the way, credit for that tip goes to Axtell Sales in Des Moines (the people who are famous for their drag racing cylinders), who have a note in one of their piston instruction sheets to that effect. While you are in the area, make sure that any reliefs in the cylinder spigot have a rounded edge for the same reasons. If you have added the reliefs for a stroker motor, be sure you don't leave them sharp. Aftermarket cylinders will likely come with sharp edges here. Stock cylinders are usually ok from the factory but what about after you bore them a few times?

Working our way down the engine, the outside edges of the female connecting rod where they come into contact with the flywheel trust washers should be inspected. If you are running an early roller bearing Pan or Knuckle, then attention should be paid to the edges of the case races as well as the flywheel end play adjusting washers. In the same vein, take a close look at those case races. I have seen some new ones that were rough enough on the inner end that they would work like a grinding wheel on the end play washers. Within a couple thousand miles you will have double (or more) the end play that you set it up with!

Moving over to the gearcase, some of the aftermarket tappets (lifters) that I have seen have such sharp edges that you are in danger of cutting yourself just handling them! Obviously with the designed-in side loading on these parts in most of Harley's engine layouts, what I said about sharp edges on the lower edges of piston skirts also applies to both the top and bottom edges of the tappets.

Back up top, everything that I said about the piston domes in regards to pre-ignition also applies to the combustion chamber.

You're probably starting to get the idea by now. Just examine each part before you install it, and consider how any sharp edges you find might effect the engine. Remember, look sharp . . . but don't leave it sharp. A happy Harley engine is one that looks sharp on the outside, but isn't sharp on the inside.

Lest Any Man Should Boast

Ephesians 2:8-9 For by grace are ye saved through faith; and that not of yourselves: it is the gift of God: Not of works, lest any man should boast.

Lest any man should boast! If any man is a saved, born again believer in Christ, he should understand that he has no reason to boast. He should understand that it is nothing that he has done that has earned him his salvation. In fact there is nothing he could have done to gain God's favor. This verse is one (of many) of the reasons that the system of theology that I hold to makes me what may be called a "Sovereign Grace Baptist" as opposed to a "Free Will Baptist". Sovereign Grace Baptists, of course, are those who agree with the "Doctrines of Grace", more commonly called Calvinism.

Calvinism! That name is certainly one that will get a reaction from nearly anyone who calls himself a Christian! Often the reaction may go something like this: "those Calvinists are so arrogant that they think God chose them and no one else; what makes them think they are so special?" In truth, I am sure that there are some who call themselves Calvinists who probably do have such an attitude to some extent. Some of those may just misunderstand the doctrine, some may just misunderstand the Bible, and I fear some of them are just not even really Christians. But that is fair, because I am sure that there are as many that would say that they believe in "Free Will" occupying those same boats.

No Calvinist that properly understands the doctrines of Grace would argue that God chose to save him because of any good he saw in him. Just the opposite, in fact. They would argue that God chose them despite what he saw in him! This passage in Ephesians clearly states that no man has any reason to boast of salvation. If this is true (and it is, because the Bible says it) then whichever of these two doctrines allows room for boasting must have a problem.

When I was saved I fully believed that I had "made a decision" to "accept Christ". As I came to understand the Doctrines of Grace, I saw that if that had been true, then the only difference between myself and someone else who heard the same gospel yet did not get saved, was that I "made a decision". Would that not give me something to boast of? Even if I were just as vile and wretched a sinner (or worse) than the other, could not I boast that at least I could see my need of a savior? Would that not set me apart as in some measure better than the other?

I realize that this can be hard to get your mind around. If God chooses to save one and does not chose another, it is tough for us to grasp that it has nothing to do with him seeing something good, or lovely, or desirable in the one he "elects" to salvation. Perhaps that is because we, by nature, use such criteria when we chose who we will love.

Romans 9:11-14 reads thus: "(For the children being not yet born, neither having done any good or evil, that the purpose of God according to election might stand, not of works, but of him that calleth;) It was said unto her, The elder shall serve the younger. As it is written, Jacob have I loved, but Esau have I hated. What shall we say then? Is there unrighteousness with God? God forbid." For the most part, I think most who believe in free will (in regards to salvation) would explain that in election (choosing), God looks forward in time and "elects" to salvation those who of their own free will, chose to accept Christ. If this be true, doesn't Jacob have somewhat to boast of? After all, by that reasoning, he had enough good in him to "make a decision for Christ," when his brother Esau was so rotten that he didn't. Is not "accepting Christ" a good work? I cannot think of anything that one could do that would be better. Yet this portion of scripture states that election is not of works.

So why does God choose to save one and not the other if its not based on "accepting Christ". Romans 9:15 says: "For he saith to Moses, I will have mercy on whom I will have mercy, and I will have compassion on whom I will have compassion." Simply put, it is God's will that determines the matter. He will do whatever pleases him. That's not fair, you say? Do you really want fair? Do you really want justice? Justice would demand that each and every one of us go to hell, because we are all guilty.

We are all guilty, all made from the same sinful flesh. There is nothing in us that recommends us to God, not even the recognition of our guilt. Romans 9:21-23 says: "Hath not the potter power over the clay, of the same lump to make one vessel unto honour, and another unto dishonour? What if God, willing to shew his wrath, and to make his power known, endured with much longsuffering the vessels of wrath fitted to destruction: And that he might make known the riches of his glory on the vessels of mercy, which he had afore prepared unto glory"

Now if you happen to be reading this and you have not been born again, you may find this doctrine revolting and "mean spirited" or perhaps even depressing, but keep in mind that you can never know till the day you die that you are not of God's elect. Remember that God did not save the thief on the cross until he was dieing along side Jesus.

As for me, I certainly have nothing to boast of. Well, that's not really true. I can boast of the wonderful mercy of God!

When Shovelheads Ruled the World, Part 3

So there we were in the foothills outside of Colorado Springs, a little concerned with how the bike would run at this higher elevation, but totally excited to find Bobby's name on the list of National Records. Having spent a year working in a Dealership in Pueblo, one might think that tuning the bike for that elevation would be a piece of cake for me, but that was not really the case. Believe it or not, the S&S carb was not found on half the Harleys on the road back then as they are now, hence I had limited experience with tuning them. We didn't even get to the staging lanes before we realized we needed to start leaning it out. Each pass showed the need for more jetting work, but the bike was running a little better with each jet change. When I put in the smallest main jet we had, the motor was still noticeably rich as it came onto the main. So there we had a bit of a dilemma. We were told that "the Dragonman" had an adjustable main jet at his shop that we could buy, but that would mean only having one or two passes to try to tune the adjustable main. We hadn't noticed any bikes in our classes running as quick as Bobby yet, so I made the call to leave well enough alone.

Of course once it was too late to get the adjustable main, the fast bikes showed up! My first job as a Harley mechanic was working for Conger's Harley Davidson in Pueblo, Colorado. I learned a lot in the two years of motorcycle mechanics school that I had attended, but it was nothing compared to what I learned in a year working for Dick Conger. So who do you think showed up Sunday morning, but Dick with an Evolution powered bike, along with a friend on an 88 inch Shovel (that Dick built) which was known for being among the fastest Harleys in Pueblo. Both bikes were "teched" into the same "Street Racer FL" class with Bobby. I don't think I ever got a straight answer as to the engine size of Dick's Evo, but I kind of always assumed it was an 80". I knew that if anyone could make a stock cubic inch Evo run with the stroker Shovelheads, Dick could!

Dick, on the Evo, his friend on the 88" Shovel, and Bobby all worked their way through eliminations without too much trouble. Time has taken its toll on the details, so I really don't remember whether it was Dick or Bobby who beat Dick's friend in the semi finals, but either way the finals were looking like a big showdown, at least in my eyes.

As Bobby staged the bike against Dick in the finals, I couldn't help but wonder if I had blown our chances of winning by not trying the adjustable main jet. That little 93" Shovel came through with flying colors though, despite a momentary "blubbering" in each gear! I felt just as elated as if I had been the one on the bike beating my old boss.

The "shoot out" between the winners of each of the street classes was truly anticlimactic, though it did provide a few moments of frenzied activity. We brought the bike into the staging lanes for the first round not suspecting any problems, but when it was time for us to go I couldn't get the bike started. I kicked until I was blue in the face, then Bobby kicked until he was. Finally I pulled a plug wire to check for spark; None! There were only a couple pairs of bikes still waiting their turn as I made a mad dash to where we were pitted to get tools. By the time I got back there were only two bikes left to run. The racer in the other lane was kind enough to wait for us, but all hope quickly left us when I inadvertently sliced a plug wire in half with my buck knife. I no longer recall what I even had the knife out for, but I suspect I was attempting to cut a tie wrap.



Didn't matter much though, both Bobby and I were still grinning about winning our class again. Afterwards, as we were chatting with Dick Conger, Bobby graciously mentioned to him that he must be pretty happy with the race results, since he had built two out of the three fastest bikes and taught the one who built the other.

Bobby and I had never heard the expression "quit while you're ahead", so much of the talk on the long drive back to Minnesota had to do with getting to the next race on the schedule, St Louis! That story will have to wait for another day though...

By Grace

For by grace are ye saved through faith; and that not of yourselves: it is the gift of God: Not of works, lest any man should boast. (Ephesians 2: 8-9)

This is one of my favorite verses in the bible. It seems like one could never run out of messages to write (or preach) on this verse alone. OK, that is an exaggeration. But the limiting factor would be the preacher, and not the depth of the scripture itself.

In years past I would use this verse to try to show people that grace was a gift of God and couldn't be earned by what we do. Of course that is true, but now I will more often use the verse to show that faith is a gift of God. That faith is the gift of God is what the verse actually states, though for years I had read it without realizing that. I came to the conclusion that this verse taught that faith is a gift of God using the logic that if grace was something that you received as a result of faith, then grace was no longer a gift, but the payment for your faith. Grace and faith must both be the gift of God, or else neither of them were, I thought. I still see that reasoning to be correct. However that truth is much simpler than my reasoning made it out to be. I had come to the right conclusion, but when I heard a preacher with a little better grasp of English explain it, I felt silly. The word "that" in the phrase "and that not of yourselves", refers to faith. One could paraphrase the verse like this: For by grace are ye saved through faith; and that faith is not of yourselves: it is the gift of God. Thus it takes no reasoning to get "faith is a gift" from this verse, it only takes an understanding of basic English. In my defense though, it has been about 35 years since high school English classes for me.

What does it matter, you ask? Grace is, I believe, THE defining difference between Christianity and every other religion in the world. As near as I can tell, all other religions teach that it is your good works that earn you a place in heaven. If you believe that the Bible is God's inspired word, then you have plenty of proof of exactly the opposite. In fact the Bible tells us that "all our righteousnesses are as filthy rags" (Isaiah 64: 6) Our "righteousnesses" (right acts) are in fact our good works. How many people in the world today are trusting in their "filthy rags", when the only thing that can help them on judgement day is Christ's righteousness?

The understanding of grace is, I believe, also one of the defining differences between all those who call themselves Christian, yet hold to such different doctrines. These differences in understanding of grace run the gamut from the belief that one is saved by faith plus works, to the belief that one is saved by baptism, to the belief that God saves anyone who will cooperate with him by accepting Jesus, to the belief that God does it all. I subscribe to the last view. I believe that the Bible teaches that God chose those who it pleased him to save, (despite their unworthiness and not due to anything they do), gives them faith and changes their hearts so that they desire to repent and live a changed life with Jesus Christ as their Lord.

Shovel Head Gasket Tip

Since I have been on the subject of Shovelheads lately (drag racing stories) it came into my mind to give a tip on torquing Shovel head bolts. This is a trick that was taught to me by Dick Conger over 25 years ago while I was working for him in his Harley dealership in Pueblo Colorado. If you are sharp you may note that is somewhat similar to the factory torquing sequence for Evolution head bolts, but Dick taught me this before the Evolution was even born!

I say that it is similar to the evolution torque pattern, in that it tightens down on each side of the oil drain hole first and then goes to the opposite side. The idea is to put a good tight squeeze on the drain hole first, since that is generally the source of head gasket failures on a Shovel. Of course it is far different from the Evolution sequence in respect to torque steps, as the Evo sequence is more concerned with cylinder distortion.

A little lube on the threads as well as under the head of the bolt will help keep your torque readings accurate. And don't forget, you also want to reach the torque setting of your wrench while it is still moving, because it takes more torque to start a bolt moving than it does to turn it. For that reason it helps to plan ahead so that you don't run out of room to "swing" your torque wrench just before you reach the full torque reading.

I know some will say that you don't need a torque wrench for Shovel headbolts. I even talked to a tech at S&S recently (who will remain nameless) that said he doesn't use one for Shovelheads. My only answer would be, that of the thousand or so Shovel engines I have torqued using this method, the failure rate has been zero, or very close to it. Happy wrenching!

Holy, holy, holy

God is a HOLY God. And just to be sure we are talking about the same God, I mean the Creator; the God of Abraham, Isaac and Jacob; the God and Father of our Lord and Savior Jesus Christ; Jehovah; Yaweh . That is who I mean when I say that God is a Holy God. Websters defines holy, as it is applied to God, as perfectly pure, immaculate and complete in moral character. But do any of us really grasp the true holiness of God?

Isaiah 6:1-4
1: In the year that king Uzziah died I saw also the Lord sitting upon a throne, high and lifted up, and his train filled the temple. 2: Above it stood the seraphims: each one had six wings; with twain he covered his face, and with twain he covered his feet, and with twain he did fly. 3: And one cried unto another, and said, Holy, holy, holy, is the LORD of hosts: the whole earth is full of his glory. 4: And the posts of the door moved at the voice of him that cried, and the house was filled with smoke.

Notice that the door posts shook at the voice of the seraphim. These were not just door posts as we have in our houses. I have to think that the door posts in the temple of God are pretty substantial! And the seraphim is merely a creature created by God. Can you imagine how much more powerful the voice of God himself is! Notice also that the seraphim says; "Holy, holy, holy is the LORD of hosts". I have heard it preached that since this is the only time that one of God's attributes is declared 3 times in a row, it means that holiness is his over riding attribute. I am not sure that is true, but neither would I argue with it. God's holiness certainly does help us understand some things about him.

Is it not God's holiness that demanded the substitutionary death of Christ? After all, if God's perfect love were to overshadow his perfect justice, could not he have forgiven us our sins without anyone paying the penalty. But that would have compromised his holiness, would it not? And conversely, if God's perfect justice was a stronger attribute than his love, he needn't have sent his son to pay the penalty of sin, he would have required us each to pay our own debt. But that too would have compromised his holiness as he would no longer then be a God of mercy!

I once had a man tell me that he believed that God is most of all merciful and that he would give everyone one last chance to be saved after they died. But where do we find that in the Bible? The Bible shows that he is a God of justice and judgment. Revelation 20: 12 tells of judgment.

"And I saw the dead, small and great, stand before God; and the books were opened: and another book was opened, which is the book of life: and the dead were judged out of those things which were written in the books, according to their works. "


The only way any of us can escape the judgement that we deserve is through the perfect justice of a holy God being satisfied by Christ taking our place in judgement! His suffering and death on the cross to pay the penalty that we earned with our sin!

Do any of us really grasp the holiness of God? I think not, or we would each day fall on our faces and say as Isaiah did when he saw the Lord sitting upon a throne, high and lifted up:
"Then said I, Woe is me! for I am undone; because I am a man of unclean lips, and I dwell in the midst of a people of unclean lips: for mine eyes have seen the King, the LORD of hosts."